Comment on page
BLK: Block Mode: A set of one or more programmable memory mapped apertures provided by an NVDIMM to access its media. This indirection precludes the performance benefit of interleaving, but enables NVDIMM-bounded failure modes.
BTT: Block Translation Table: Persistent memory is byte addressable. Existing software may have an expectation that the power-fail-atomicity of writes is at least one sector, 512 bytes. The BTT is an indirection table with atomic update semantics to front a PMEM/BLK block device driver and present arbitrary atomic sector sizes.
DAX: Direct Access File system extensions to bypass the page cache and block layer to mmap persistent memory, from a PMEM block device, directly into a process address space.
DPA: DIMM Physical Address: is an NVDIMM-relative offset. With one NVDIMM in the system there would be a 1:1 system-physical-address:DPA association. Once more NVDIMMs are added a memory controller interleave must be decoded to determine the DPA associated with a given system-physical-address. BLK capacity always has a 1:1 relationship with a single-NVDIMM's DPA range.
DSM: Device Specific Method: ACPI method to to control specific device - in this case the firmware.
LABEL: Metadata stored on an NVDIMM device that partitions and identifies (persistently names) storage between PMEM and BLK. It also partitions BLK storage to host BTTs with different parameters per BLK-partition. Note that traditional partition tables, GPT/MBR, are layered on top of a BLK or PMEM device.
NVDIMM: A Non-Volatile DIMM device (also called a module) installed in to a memory socket on the system board. Data is written to the device and stored persistently, meaning data is retained across power-cycles.
PMEM: Persistent Memory Mode: A system-physical-address range where writes are persistent. A block device composed of PMEM is capable of DAX. A PMEM address range may span an interleave of several NVDIMMs.