Erases the persistent data on one or more module.
$ ipmctl delete [OPTIONS] -dimm [TARGETS] Passphrase=(string)
-dimm (DimmIDs): Erases specific module device data by supply one or more comma-separated DimmIDs.
Passphrase: The current passphrase (1-32 characters). If security state is disabled, then passphrase is not required and will be ignored if supplied. If security state is enabled, then a passphrase must be supplied.
Security disabled modules: Erase all persistent data on all modules in the system
$ ipmctl delete -dimm
Security enabled specifics: Erase all the persistent data on all modules in the system
$ ipmctl delete -dimm Passphrase=123
Erase all the persistent data on all modules using the CLI prompt for the current passphrase.
$ ipmctl delete -dimm Passphrase=""
The specified module must be manageable by the host software, have security enabled and not be in the "Unlocked, Frozen", "Disabled, Frozen", or "Exceeded" lock states.
Command is subject to OS Vendor (OSV) support. If the OSV does not provide support, command will return "Not Supported."